Ready Mixed Paint
Creases are seen on the coating film of silver ready mixed paint.
It could be due to the following four reasons:
1.The film is too thick. Please apply the paint according to the specified film thickness.
2.The coating interval is too short. Please apply the paint according to the specified coating interval.
3.Wrong solvent is used. Please use the correct solvent.
4.The site is poorly ventilated that is not easy for drying. It is suggested that the site should be fitted with additional ventilation equipment such as electric fan, etc.
1.The film is too thick. Please apply the paint according to the specified film thickness.
2.The coating interval is too short. Please apply the paint according to the specified coating interval.
3.Wrong solvent is used. Please use the correct solvent.
4.The site is poorly ventilated that is not easy for drying. It is suggested that the site should be fitted with additional ventilation equipment such as electric fan, etc.
Assuming that the outdoor steel structure has been coated with ready mixed paint, if to apply the coating again in order to resist against acid and alkali, how should it be treated?
We suggest that you should remove the ready mixed paint from the surface with paint remover and then apply two layers of 1061H(EP-999-H) High Solids Epoxy Coating Finally, apply one layer of UP-04 vinyl ester finish coat.